https://www.stahls.com/stahls/content/images/products/HP-Htrnx-PortableLaserAlignment-A_small.jpg

Sistema de alineación láser para prensas de calor

Coloca fácilmente transfers y diseños.

Ensure consistent placement and accurate positioning for every heat printing job with the Heat Press Laser Alignment System by Hotronix®.

Aprende a dimensionar diseños de manera correcta y a obtener siempre colocación perfecta con la mejor guía sobre tamaños y ubicación de diseños.
Cantidad:
Agregar
Por favor, espera... Agregando al carrito

  • Cuatro lásers que se posicionan independientemente
  • Se apoya sobre cualquier superficie de mesa
  • Compatible con cualquier modelo o fabricante de prensa de calor
  • Incluye Laser Alignment Wizard™
Laser Alignment Wizard™
  • Ayuda a ubicar las bombillas para la preparación inicial de la aplicación de calor
  • Plantillas resistentes, anilladas
  • Cinco lugares de diseño populares
  • Reglas para ubicación personalizada
Características y beneficios

Características

  • Cuatro lásers, cada uno accionado de manera individual (usa los cuatro lásers o solo uno).
  • Los lásers se pueden ubicar de manera individual para alinear logos a la izquierda del pecho, letras y números individuales, nombres con caligrafía, diseños de transfers en el frente completo, etc.
  • Compatible with any heat press, regardless of manufacturer or model (Dual Air Fusion™ Owners: A Dual Air FUSION® Heat Press Laser Alignment System is available).
  • Dimensiones y peso: 16" x 10" x 5" 10 lb
  • Tamaño y peso del envío:
    21" x 13" x 7" 10 lb
  • Garantía: Un año el láser, 90 días las bombillas.

  • Requiere 18" de espacio de mesa.
  • Requiere armado.
  • No se recomienda para la ubicación de estantes Caddie™ para prensas de calor.
Reseña

Clasificación promedio

2.3
(basado en 10 reseñas)
 Don't do it
Reseña de Jerry 10/25/2018 3:33:53 p.m.

This is maybe a $30 product at best. I went against my better judgement and got one to try it out to speed up production and it slowed me down instead. The build quality isn't all there and its horrible trying to align the lasers. If you manage to do that, and you bump it then forget it. The locking mechanism for the lasers is about useless as they will still move with a slight touch. I had to send mine back and eat the restock fee because I couldn't live with myself for that price.


 Don't waste your money
Reseña de Lee 8/13/2018 8:21:47 p.m.

This thing is such a turd. The first one I got showed up missing parts and one laser didn't work, stahl's replaced it no questions asked (nothing bad to say about their customer service). Got my second one and as others said, it's literally impossible to align anything. Once you spend an hour aligning it thinking you can get to work and not worry about it anymore, it comes out of alignment within 3-5 presses and you have to start over again. I even took drastic measures and mounted it overhead and isolated away from any type of movement or vibration, but I realized that was also a waste because if your press isn't bolted to the table it will move slightly with every open (even the big heavy fusion IQ like mine). I've gotten a ton of equipment from stahl's and have been impressed and happy with all of it, but this thing plain sucks.


 Could have been great...
Reseña de Mike 4/30/2018 4:42:27 p.m.

The laser lines are easy to see and there's a lot of flexibility in positions and combinations but... The locking mechanism is useless. As other reviewers have stated, as you tighten the locking screws, the laser position changes in all directions. You basically have to hold the laser out of position and hope it ends up where you intended after tightening. There is no way to quickly position the laser into vertical or horizontal alignment as the mount is free to move in all directions. If you accidentally bump the laser stand you must start over. If your press isn't bolted down to the table, it moves slightly every time you open or close it and you lose alignment. Huge waste of time and money.


 good concept, but junk
Reseña de Jim Carroll 4/20/2018 10:15:05 AM

Worked GREAT for a couple years. Bought in 2015, It quit working so we replaced the power supply...still nothing. Called them again and the nice lady said 'sorry, we don't have parts and can't trouble shoot it. You will have to buy a new one.' Well, isn't that a kick in the ass. Save your time and money, or buy 2, one to use and one to pirate parts from after a couple years.


 Nice idea, but AWFUL implementation
Reseña de Adam Hayn 8/4/2017 3:29:23 p.m.

Such a great idea. We made our own previously and put it overhead pointing down at the platen. This came with our air fusion but their system is awful. like the other reviewer said, as soon as you tighten the laser...they just move. It is near impossible to line things up. The only way I see to fix this problem is to make it over the garment.


 Paid for Itself Right Out of the Box!
Reseña de J Wright 3/31/2017 6:06:27 p.m.

This is such a great tool for alignment! I got a rather sizable order finished in record time (for me) right after it arrived at my door. Once I got the lasers set, there's no second guessing, and the t-shirts looked great! I can see how this may also help me align items for embroidery. The only two negatives: 1) I'm short, so handling the lasers was a little awkward at first because the the height of my table + the height of the lamp does not = the height that's right for me. I plan to fix that. 2) Made in China, but hopefully that will change some day. :) This is a great product, and I highly recommend it.


 Best tool for my heat press ever
Reseña de Robert Lopez 4/29/2016 10:41:07 p.m.

Love Heat Press Laser Alignment System. this is a great time saver and I get perfect alignment every time. I have had people ask me how all my graphics turn out with perfect placement on all my products.


 Not worth $315.00
Reseña de Jeff 2/22/2016 9:56:52 p.m.

I thought this was a nice idea.My machine already came with the laser's in,and does work well.When you go to tighten the screw to hold the laser in position you can even tighten it down with an allen wrench. Once you let go it moves and wiggles around so this is no time saver for me as I have to spend 30 minutes trying to get the lasers to stay put.


 Great Time Saver
Reseña de Jeremy 12/23/2015 9:05:04 AM

Took a few minutes to put together, but once it is up and running, it is a huge time saver. No longer do you have to guess or measure where your logos go. Just wish I had waited for this new model to come out. The lasers on this new model look to have much more configurable angling of the lasers.


 Not worth $300.00
Reseña de Howard 10/20/2015 12:47:10 p.m.

Verry hard to set up I tride to set up for a total of 7-8 hrsnever did get it just gave up before I lost my religion. 1st and only thing I bought from Stahls I don't like.


Reseña este producto.

1. Información de contacto:

Nombre
Compañía
Correo electrónico

2. Evalúa este artículo:

3. Título de tu reseña:

4. Escribe tu reseña:

ENVIARRESTABLECER
Panorama general

Videos educativos

Ver todos los videos >

Ingresa o regístrate para crear una lista de tus favoritos

Ya tienes 10 favoritos.
Quita uno para agregar este.

Agregando favorito...